How to use ‘Reset’ button on NVRSolo/NVRMini2/Solo_Plus?

Purpose

The ‘Reset’ button on NVRSolo/NVRMini2/Solo_Plus can be use to…
NVRSolo/NVRMini2/Solo_Plus上的“reset”按鈕可用於......

1.  Reset admin account password
重置管理員帳戶密碼

2.  Restore NVR to factory default
將NVR恢復為出廠默認設置

Reset admin account password procedures
重置管理員帳戶密碼程序

1.  Verify that the system is fully booted
驗證系統是否已完全啟動

2.  Find simply a probe longer enough to insert into the reset button on the device
簡單取得一個夠長且可以插入重置按鈕的探針

3.  Press and hold the reset button for 8 seconds, release until the buzzer beeps one time and the system status LED flashes in blue.
按住重置按鈕8秒鐘，然後鬆開，直到蜂鳴器發出一次嗶聲，系統狀態LED指示燈呈藍色閃爍。

NVRSolo

NVRMini2

Solo_Plus

4.  System will restart and the administrator’s password is now reset to ‘admin’.
系統將重新啟動，管理員密碼現在重置為“admin”。

Restore NVR to factory default procedures
將NVR恢復為出廠默認程序

1.  Press and hold the reset button for 14 seconds, release until the buzzer beeps twice and the system status LED flashes in orange.
按住重置按鈕14秒，然後鬆開，直到蜂鳴器發出兩次嗶聲，系統狀態LED指示燈呈橙色閃爍。

2.  System will restart and all settings are reset to default.
系統將重新啟動，所有設置都將重置為默認值。