Are my cameras supported by NUUO products via ONVIF?

Description

How to verify ONVIF support on my cameras?

如何確認網路攝影機是否支援ONVIF？

Do NUUO products support muliti-stream, PTZ control, motion detection, I/O and talking through my camera via ONVIF?

NUUO的產品是否支援透過ONVIF協議向網路攝影機取得多串流、PTZ控制、移動偵測、數位輸入/輸出以及語音？

Note: based on Device Pack version 3.5 and above.

注意：本篇文章內容相關資訊是基於NUUO Device Pack 3.5以上的版本才相容。

Solution

1. Please make sure that you use "Device Pack" version 3.5 and above on NUUO products

1. 請確認NUUO產品使用了"Device Pack" 3.5以上的版本。

2. Please make sure you have ONVIF test report, and this report contains two parts:

2. 請確認你手上已取得網路攝影機所產生的ONVIF測試報告，這份測試報告分做兩個部分：
A. Declaration of Conformance, and B. ONVIF Conformance Test Report

A. Declaration of Conformance，以及B. ONVIF Conformance Test Report

A. Declaration of Conformance

A. 有關於Declaration of Conformance

B. ONVIF Conformance Test

B. 有關於ONVIF Conformance Test



3. Please make sure your camera supports Profile S with Test Tool version 12.06 at least on "Declaration" part

3. 請確認在網路攝影機ONVIF測試報告有關"Declaration of Conformance"這個部分裡，裡面有標示了網路攝影機支援Profile S，並且所使用的ONVIF測試工具版本是至少12.06以上。


4. Please make sure the test result is "TEST PASSED"  on page 2 of "ONVIF Conformance Test Report":

4. 請確認在網路攝影機ONVIF測試報告有關"ONVIF Conformance Test Report"這個部分裡，第二頁標是測試結果顯示"TEST PASSED"。


5. Please make sure that ONVIF service port on your camera is 80 (sync. with http port), if not, please ask manufacturer for the correct port.
5. 請確認網路攝影機所使用的ONVIF服務埠號是80(與HTTP協議所使用的埠號相同)。若不是，請與網路攝影機的製造商確認正確的埠號。

6. Please make sure that, according to the features you request, the required test items are NOT test failed on the test report:

6. 請依據不同網路攝影機功能的需求，確認在ONVIF測試工具裡的功能對應測試項目在測試報告裡不是呈現FAILED的結果：


7. For Multi-stream support: Your camera must support more than 1 profile, and the below test items must be passed, therefore they should not be found in failed items: 

7. 有關於網路攝影機是否支援多串流：網路攝影機並需支援多於1個Profile，同時以下條列出來的測試項目必須通過才不會被列在FAILED清單裡。

Media Configuration – Media Profile

MEDIA-1-1-1 MEDIA PROFILE CONFIGURATION

MEDIA-1-1-2 DYNAMIC MEDIA PROFILE CONFIGURATION

Media Configuration – Video Configuration

MEDIA-2-1-1 VIDEO SOURCE CONFIGURATION

MEDIA-2-1-2 VIDEO ENCODER CONFIGURATION 

MEDIA-2-1-3 JPEG VIDEO ENCODER CONFIGURATION

MEDIA-2-1-4 MPEG4 VIDEO ENCODER CONFIGURATION

MEDIA-2-1-5 H.264 VIDEO ENCODER CONFIGURATION 

8. For PTZ support: (PTZ, preset, home) the below test items must be passed, therefore they should not be found in failed items: 

8. 有關於網路攝影機是否支援PTZ： (PTZ、preset以及home等等功能)以下條列的測試項目必須通過才不會被列在FAILED清單裡。

PTZ – Move Operation

PTZ-3-1-3 PTZ RELATIVE MOVE

PTZ-3-1-4 PTZ CONTINUOUS MOVE

PTZ-3-1-5 PTZ CONTINUOUS MOVE & STOP
 

PTZ – Preset operations

PTZ-4-1-1 SET AND GET PRESET

PTZ-4-1-2 GOTO PRESET

PTZ-4-1-3 REMOVE PRESET
 

PTZ – Home Position operations

PTZ-5-1-1 HOME POSITION OPERATIONS (CONFIGURABLE)

PTZ-5-1-2 HOME POSITION OPERATIONS(FIXED)

 

Imaging – Imaging Settings (Focus)

IMAGING-1-1-1 IMAGING COMMAND GETIMAGINGSETTINGS

IMAGING-1-1-9 IMAGING COMMAND SETIMAGINGSETTINGS
 

Imaging – Focus Move

IMAGING-2-1-5 IMAGING COMMAND RELATIVE MOVE

IMAGING-2-1-7 IMAGING COMMAND CONTINUOUS MOVE

IMAGING-2-1-13 IMAGING COMMAND STOP

9. For Motion Detection and IO support:

9. 有關於網路攝影機是否支援移動偵測以及數位輸入\輸出：
There are total 3 criterias should be met:

必須符合三個準則：

A. Below key words have to be in the notification body

A. 以下列出的關鍵字必須出現在事件告警的主體(body)裡

MD: Motion / Inside

DI : Alarm / Port / Input

DO : Relay

B. ONVIF supports 3 event notification methods, and NUUO only supports two of them.

B. ONVIF支援以下三種事件告警方式，但是NUUO的產品只支援其中兩種。

“Basic Notification”
“Real-time Pull-Point Notification”

“Notification Streaming” (Metadata)
--> If your camera uses "Basic Notification" method, it is NOT supported by NUUO

--> 假若網路攝影機有使用了"Basic Notification"這個方式，NUUO的產品便無法支援。

C. The below test items must be passed, therefore they should not be found in failed items: 

C. 以下條列的測試項目必須通過才不會被列在FAILED清單裡。

Device Management – I/O

DEVICE-5-1-1 IO COMMAND GETRELAYOUTPUTS

DEVICE-5-1-3 IO COMMAND SETRELAYOUTPUTSETTINGS

DEVICE-5-1-5 IO COMMAND SETRELAYOUTPUTSTATE – BISTABLE MODE (OPENED IDLE STATE)

DEVICE-5-1-6 IO COMMAND SETRELAYOUTPUTSTATE – BISTABLE MODE (CLOSED IDLE STATE)

Event Handling – Event Properties

EVENT-1-1-2 GET EVENT PROPERTIES
 

Event Handling – Real-Time Pull-Point Notification Interface

EVENT-3-1-9   REAL TIME PULLPOINT SUBSCRIPTION – CREATE PULL POINT SUBSCRIPTION

EVENT-3-1-15 REAL TIME PULLPOINT SUBSCRIPTION – PULLMESSAGES
 

Media Configuration – Metadata Configuration

MEDIA-5-1-1 METADATA CONFIGURATION
 

10. For Talk support: No specific test case is needed currently, however your camera MUST support RTSP back channel

10. 有關於網路攝影機是否支援語音：關於這個項目在ONVIF測試工具裡並沒有明確對應的測試項目，不過網路攝影機必須支援RTSP back channel。

11. If you have confirmed the above 11 items, and still your camera can't not be supported by NUUO products, please contact us via eHelpdesk with ONVIF test report.

11. 如果你已經確認以上11個項目都是通過的，但是你所使用的網路攝影機依舊無法透過ONVIF協議跟NUUO產品接上時，請透過eHelpdesk連繫我們並一併提供網路攝影機的ONVIF測試報告。